More than 25% of Americans use a septic tank to manage waste, especially in rural areas. Having a septic system comes with responsibilities, including knowing how the septic system works, maintaining it properly, and recognizing when it needs attention. This comprehensive guide covers everything you need to know about septic tanks, from their basic functionality to types, maintenance requirements, and associated costs.
What is a Septic Tank?
A septic tank is a watertight receptacle that’s buried in the ground. A two- to three-bedroom house usually requires a minimum of a 1000-gallon capacity tank. It’s connected to the house’s waste drains by a pipe that feeds into the tank inlet. Partial walls inside the tank known as baffles are meant to promote the settling of waste. Although older tanks may not have them, most new tanks are fitted with filters that prevent smaller particles from entering the drain field. Tanks also often feature a port or riser at the top for pumping access.
How Do Septic Tanks Work?
Waste flows from the house to the tank, where heavier solids (sludge) settle to the tank’s bottom while lighter solids and liquids remain at the top. In the tank, colonies of bacteria break down the sewage. The waste liquids (effluent) flow out of the tank and down into the drain or leach field via perforated pipes laid in trenches filled with gravel or stone and covered with geo-fabric and dirt. The stone/gravel filters the effluent, which then drains into the soil below, where it is processed by microbes that live in the soil, and finally flows as clean water into the groundwater.
Components of a Septic Tank System
An effective septic system contains several components that work in unison to process household waste.
Septic Tank
This is where the initial treatment takes place. Solids settle at the bottom (sludge), and oils and grease float to the top (scum). Naturally occurring bacteria decompose the solid matter.
Piping
Piping is a crucial aspect of your septic system. Inlet and outlet pipes transfer wastewater into and out of the tank. Leach pipes distribute effluent through the drain field.
- Inlet pipe: Wastewater from your home enters the septic tank through an inlet pipe
- Outlet pipe: The treated liquid, or effluent, flows out of the septic tank and into the drain field
Distribution Box
This component evenly distributes wastewater from the septic tank to the drain field lines. If it becomes clogged or damaged, it can lead to uneven distribution and system failure.
Drain Field
Also known as a leach field, this is where the wastewater undergoes further treatment by filtering through soil. The soil’s natural filtering capability removes harmful substances from the effluent before it reenters the groundwater system.
Types of Septic Tanks
Septic systems come in different types, each suited to various needs and ground conditions. Knowing the type of septic system you have can help you maintain it properly.
Anaerobic Systems
Anaerobic systems are the most common type used in residential properties. These systems work without oxygen. Wastewater moves into the tank, and anaerobic bacteria break down the solids. The entire process is relatively simple and less costly to install compared to other types.
Aerobic Systems
Aerobic systems are more complex than anaerobic systems and use oxygen to treat wastewater. Because they introduce air into the tank, aerobic systems can handle and treat waste more efficiently. They’re suitable for properties with poor soil conditions or smaller drain fields but are generally more costly to install and maintain.
Materials Used in Septic Tank Construction
The best material for a septic tank depends on various factors, including cost, local regulations, and ground conditions. Here are the most commonly used materials:
- Concrete: Concrete tanks are the most traditional option and are liked for their durability. They’re less likely to “float” in upended soil conditions but can crack under extreme pressure or shifting.
- Fiberglass: Fiberglass tanks are lightweight and resistant to cracking, rusting, and biological buildup. They’re easy to transport and install, though they may shift in certain soil conditions.
- Polyethylene: Polyethylene tanks offer a lightweight, durable option that is resistant to cracking and rusting. They’re less prone to leaking and are easier to install in remote or difficult-to-access areas.
Maintenance Requirements and Frequency for a Septic Tank
Proper maintenance extends the life of your septic system and ensures it operates efficiently.
Regular Inspections
The EPA (Environmental Protection Agency) recommends that septic tanks be inspected every three years by a professional. To find wastewater professionals in your area, check out The National Onsite Wastewater Recycling Association (NOWRA). Mechanical parts like pumps and switches should be inspected annually.
Pumping Frequency
Septic tanks need to be pumped to remove the buildup of scum and sludge. If your drains are slowing down or you have a new pond in your backyard, it may be a sign that your tank needs to be pumped.
Water Conservation
Conserving water reduces the load on your septic tank. Fix leaks, install low-flow fixtures, and avoid running multiple water-heavy appliances simultaneously to reduce the strain on your system.
Proper Waste Disposal
Avoid flushing nonbiodegradable items, grease, or harsh chemicals down the drain. These can damage your system or block pipes, leading to costly repairs.
Septic Tank Lifespan and Replacement Considerations
The typical lifespan of a septic tank is 15 to 40 years, depending on the material, maintenance practices, and soil conditions.
You may need to replace your septic system if you notice any of the following:
- Persistent foul odors around the tank or drain field
- Slow-draining sinks and toilets
- Sewage backup into your home
- Lush green grass over the drain field, which can indicate a leak
Replacement Costs
Replacing a septic system can be costly. Depending on the size, design, and materials used, it can range from $3,522 to $11,792.
*Cost data in this section sourced from contractor estimates used by Angi.
Septic Tank Installation and Maintenance Cost Factors
Knowing the costs involved in both installing and maintaining a septic system can help you budget effectively.
Installation Costs
Several factors influence the cost of installing a septic system, including:
- Tank material: Concrete tends to be more expensive than fiberglass or polyethylene
- Soil conditions: Poor soil conditions may require specialized systems, which can increase costs
- Local regulations: Compliance with local codes and permits can also add to the overall cost
Maintenance Costs
Ongoing maintenance costs can include:
- Regular pumping: This can cost between $289 and $555, depending on tank size and location.
- Repairs: Repairing components like pumps, pipes, or the distribution box can vary based on labor and parts but typically range from $630 to $3,033.
- Inspection fees: Professional inspections generally cost around $550.
Septic Systems Environmental Impact
Septic systems can significantly impact the environment, both positively and negatively.
Positive Impacts
When properly maintained, septic systems provide a natural, cost-effective way to treat household wastewater. They recharge aquifers and reduce the load on municipal sewage systems.
Negative Impacts
Faulty or poorly maintained systems can contaminate groundwater sources, leading to environmental and health hazards. To mitigate these risks, it’s essential to ensure your system works efficiently.
Regulations and Permits for Installing a Septic Tank
Compliance with local regulations and obtaining the necessary permits is critical when installing or modifying a septic system.
Federal Guidelines
The EPA offers guidelines on septic system management. These guidelines aim to protect public health and the environment by ensuring systems are designed, installed, and maintained properly.
State and Local Regulations
State and local regulations vary but generally include specific requirements for system design, installation, and maintenance. Always consult local authorities to ensure compliance.
Permitting Process
Getting a permit typically involves submitting a detailed site plan and system design. An inspection may be required after installation to ensure the system meets all regulations and codes.
Our Conclusion
Septic tanks play a vital role in managing household wastewater, particularly for rural homeowners. Understanding how these septic systems work, the types available, and the maintenance they require can help you keep your system functioning effectively. Proper septic tank management protects your property, your health, and the surrounding environment.