Wall studs provide support for the house, but they’re also essential for anchoring heavy items that would otherwise rip directly out of drywall. Whether you’re installing a bracket for a TV, attaching a handrail for a set of stairs, or anchoring a dresser to the wall in a child’s room, fastening it to a wall stud is an absolute necessity. Finding a wall stud is easy, even if you don’t have a stud finder handy. This guide includes several methods explaining how to find a stud without a stud finder.
What is a Wall Stud?
“Stud” is a term used to describe the vertical framing members inside of walls. They’re hidden behind the drywall, extending from the floor to the ceiling. They’re spaced 16 to 24 inches apart and either measure 1.5 inches x 3.5 inches (2×4) or 1.5 inches x 5.5 inches (2×6). They may be made from wood or metal, though the studs we’ll refer to in this article are wood.
Studs are important because they form walls that divide spaces, hold up the structures above them, and give the drywall installer a strong framework to nail drywall to. That makes them stable enough to support heavy items. An installer can drive nails or screws into studs and support more weight than drywall can alone.
How To Find a Stud Without a Stud Finder: Six Methods
While a stud finder is certainly the fastest way to locate a 2×4 or 2×6 behind drywall, you may not always have one on hand. But it’s not the only way to find a stud. The following solutions will help locate a stud to nail into the next time you need one.
1. Check Electrical Receptacles and Light Switches
You’ll need:
Electrical receptacles and light switches are almost always nailed to the side of a stud, making these devices the perfect place to look. Simply use a screwdriver to remove the cover plate and look between the gap in the drywall and the electrical box to locate the stud on either side. Now measure out every 16 inches to find the edge of each following stud.
If you can’t see the stud through the gap: Turn off the power to the outlet and slide a nail between the drywall and the electrical box. Angle the nail to the side and push to find the stud. If it keeps going, try the other side of the box.
2. Run a Magnet Along the Wall
You’ll need:
- Strong rare earth magnets OR
- A tool like a level or tape measure with a strong magnet built-in
Drywall installers fasten drywall to the studs using nails or screws, and a magnet can help pinpoint their locations. It’s also perfect for finding a stud exactly where you need to rather than measuring from an electrical outlet.
To find the stud, place the magnet against the drywall and slowly move it around the drywall in circles, making bigger circles with each pass. Eventually, the magnet will hang onto the nail or screw, showing you exactly where the stud is.
3. Examine the Trim
You’ll need:
- A keen eye
- Finish nail
- Hammer
- Tape measure
- Caulk
Another option for finding a stud is to look at the baseboard trim or crown molding for indications because carpenters nail trim boards into studs so they don’t pop loose. Look for indications of stud locations including nail holes in the trim or where two boards meet and overlap each other slightly.. Once you find some sign of a stud, lightly drive a finish nail with a hammer into the wall directly above the baseboard (or just below the crown molding).
If it feels like there is some resistance, there is a stud behind the wall. From there, measure out 16 inches and repeat the process with the finish nail. Once you’ve found the studs, mark them on the wall and use a quick dab of caulk to hide the nail holes.
4. Shine a Flashlight on the Wall
You’ll need:
- A flashlight (a phone light is perfect)
- Painter’s tape
When a drywaller is done installing drywall, they’ll hide the nails and seams with drywall compound and tape. Looking for the locations of the nails and seams in normal light is very difficult. With a flashlight, however, every depression and protrusion will be easier to see.
Turn off the overhead light in the room and turn on the flashlight. Hold the flashlight flat against the wall while also placing your cheek against the wall. Look down the wall for any dips, protrusions, or nail heads. Nail heads are dead giveaways for studs, while dips indicate the space between studs. Protrusion indicates the stud’s rough location. Mark the stud with a piece of painter’s tape before turning on the lights.
5. Knock on the Wall
Everyone knows this trick, and while it’s not foolproof, it’s still a viable way to find a stud.
Start by tapping your knuckles against the wall, moving side to side. When the wall sounds hollow or the knock’s pitch is low, you’re between studs. As you near a stud, the pitch will get higher. When it’s at its highest, there is a stud behind the wall.
While this method does work, it doesn’t work as well when the wall is full of insulation (particularly spray foam). When that’s the case, you may need to knock harder and gauge the way the wall feels. If the wall feels hollow, you’re between studs. If the wall feels solid and doesn’t bounce, you’ve located a stud.
6. Drag an Electric Razor on the Wall
You’ll need:
- An electric razor, hair clippers, or an electric toothbrush
This one’s fun but a bit less practical. Start by turning the electric razor on and placing the handle against the wall (don’t use the blades). Drag the razor back and forth across the surface of the drywall. The buzz will sound lower between studs and increase in pitch as it nears a stud. Once it’s running at the noticeably highest pitch, you’ve found a stud.
You can do this with hair clippers or even an electronic toothbrush as well.
You May Never Need a Stud Finder Again
Remember: It’s better to take a few minutes to find a stud now than to risk installing a heavy object in drywall only to have it fall later. With these tips, you’ll be able to locate studs required for your project and anchor your TV, dresser, mirror, painting, handrail, or other object to the wall safely, securely, and permanently.